Tag: knowledge

Searching tables within the Modern Advanced Find

Well for a start, I know that the title of this blog post is somewhat of a mouthful. It’s definitely longer than my usual titles! However I felt it important to do so, given the functionality that I’m actually going to talk about…

So here goes!

As part of the Wave 1 2022 release, both for Power Platform as well as Dynamics 365, we have the new ‘Modern Advanced Find’ capability. This replaces the (legacy) Advanced Find interface, which has been around since almost the beginning of Microsoft CRM…that’s quite a few years!

So within a model-app (as this covers both Power Apps as well as Dynamics 365), the classic Advanced Find was a good friend. Though using the legacy interface (& sometimes being VERY slow to load initially), we could create powerful queries through it. Being able to specify conditions, span multiple tables (with needing to understand the data model), we were able to show & filter data as we needed to.

When loading the Advanced Find interface, we could select from any of the tables within the system, with a LONG list presented to us for this purpose:

Now, just because we could see all tables (system & custom) within the list didn’t mean we could view all data within the tables. Oh no – the security roles applied to users limited what we could do.

In fact, users having security roles with NO permissions on certain tables would NOT see those tables appearing in the Advanced Find interface. Even when users had permissions on tables, but these permissions were limited (such as only being able to view our own records), the data results would be filtered based on our security role access to the records within the table.

OK – all good so far. Well, in general – there have been various complaints over the years about the Advanced Find functionality. So finally, Microsoft updated it to the ‘Modern Advanced Find’.

This needs to be enabled by a system administrator in the environment settings:

So in order to access the Modern Advanced Find, we need to do the following:

  1. Click in the search box at the top of the screen
  2. At the bottom, click the ‘Search for rows in a table using advanced filters’ (that’s a mouthful as well, isn’t it!)

After clicking this, we then get presented with the following interface:

Once we select a table (we can only select one table, as this will be the primary table used), we then switch screens to set the filters that we want to use:

Now here’s where things got a little strange. On the filter screen, we can select related tables to the primary table (ie connected through a relationship), and we get EVERY table that’s available for this. So if we’re starting with the Accounts table, we can then select from the following:

So in this list, I can see tables such as Emails, Invoices, and various others as well. In fact, it’s actually a very extensive list (limited, of course, to all tables that have a relationship in place with the Accounts table, and which the user has access to through their security role).

But if I look back at the initial list of tables, I’m MUCH more limited in my choice:

This, to me, was quite confusing. After all, what if I wanted to start the search from a different table – one that isn’t shown in this initial list?

So I started doing some digging. Initially, I thought that these tables are the ones defined in the sitemap (ie the app navigation). This could mean that I’d need to somehow create a section that shows all tables within it, just to be able to have them searchable.

Thankfully, it turns out that this isn’t actually the case. What’s happening is that with the new Modern Advanced Find, tables need to be directly associated to the APP, to be able to show up and use for search purposes.

Actually, there’s some more granularity around this. The list of tables available to search on (as the primary table) need to meet ALL of the following criteria:

  1. Table is part of the model-driven app
  2. Table is enabled for unified interface
  3. Table is valid for advanced find (set on the table settings)
  4. User has read access to the table (handled through security roles)

So essentially, the ability to search tables within an app is now limited to the tables that have been associated to the app itself! This could be very helpful in various scenarios, when users can be quite confused with seeing the entire list of tables.

To do this, we’d edit the app, and add it to the list of tables available through the app designer (note – we don’t have to include them in the sitemap, if we don’t want to display them in the app navigation):

So this now makes sense, and I think it’s a good step forward.

Also thanks to my colleague Bill (who’s an AMAZING Customer Success Manager!) for his collaboration on this.

What are your thoughts on the Modern Advanced Find? Are you finding it better for functionality? Is there something that you feel is missing, or that you’d like to see in it? Drop a comment below – I’d love to hear!

Julian Sharp on The Oops Factor

Talking to Julian about the wonders of using IoT & AI capabilities with cats, communicating openly with customers, & putting internal comments into project documentation!


#community #learning #sharing #ownthemistake #theoopsfactor #MVPBuzzhttps://youtu.be/82JkiaLQjtE


If you’d like to come appear on the show, please sign up at http://bit.ly/2NqP5PV – I’d love to have you on it!

Click here to take a look at the other videos that are available to watch.

Girish Nandwani on The Oops Factor

Talking with Girish about the wonders of having a child (hint – she may be advanced in certain scientific items already!), his love of cricket, and being able to keep positive through very challenging situations.


If you’d like to come appear on the show, please sign up at http://bit.ly/2NqP5PV – I’d love to have you on it!

Click here to take a look at the other videos that are available to watch.

Calculated columns not working with data migration

Interesting title, isn’t it? I thought to do something that might grab peoples attention, and this was the best that I could come up with! So, let’s get into the scenario, the issue experienced, and how we managed to resolve it.

The scenario on this project was as follows. We’ve been implementing a customer service solution for a sales company, that manufacture multiple products, under multiple brands. Currently there are multiple systems used for order entries, which at some point will be moved to a single system.

However for the moment, they’re wanting to be able to carry out holistic customer service across all brands, to be able to enable all customer service agents to have access to the same data, customers able to be serviced in the same way, regardless of brand, etc.

rectangular brown wooden table

As a result, Dynamics 365 Customer Service was the ticket, and has many standard capabilities that addresses the need of the customer.

Now, whilst sales (aka orders) will not be handled within Dynamics 365 itself, we didn’t want the customer service agents to have to look up order information in the ordering systems. Instead, we wanted to be able to bring the sales/order information into Dynamics 365 for reference (at some point it’s likely that the customer will actually use Dynamics 365 capabilities for sales as well).

In order to do this, we’ve had some amazing data architects bringing the data together into Azure Data Factory (ADF)) from the multiple order systems, and then pushing the data into Dynamics 365 (users have read-only view of it).

With bringing in the data, we were looking to capitalise on the native functionality of Dynamics 365, namely the ability for columns to be automatically calculated. An example of this would be bringing in the order line amount, the tax amount, and then having the total order line amount automatically calculated. This is standard system functionality, and when working in Dynamics 365, has many different uses across the system.

Now, it’s important to note here that as we’re not actually handling orders within Dynamics 365, we’re also not holding a ‘proper’ product list within Dynamics 365 itself. However, orders need to show product information on them (bit useless otherwise!), so we’re using the capability of ‘write-in products’.

Note: If you haven’t come across write-in products before, it’s actually a really great item. Essentially, it allows products to be entered for opportunities, quotes, orders etc (wherever products are used), but for when the product/s aren’t in the system product catalogue. Write-in products allow you to simply type the name of a product or service, & then type in the price. This is very useful if, for instance, a product isn’t yet available in the product catalogue, but you still want to be able to quote it. In our scenario, we’re using write-in products to avoid the need to manage the product catalogue itself. It’s also helpful for when you don’t want to use price lists, as all products need to be associated to a price list.

So we start off the data migration, and it’s looking good. No issues being reported by the integration…

But, then users go in to the UAT system to check through things, and find that when looking at orders, the totals aren’t being calculated:

Order line not calculating
Order not calculating either!

Hmm. That’s strange. So we started to look at what could have caused this problem…

  • Is the environment in ‘admin mode’? If an environment is in admin mode, then auto-calculations won’t work at all. Well, the environment wasn’t in admin mode, so it wasn’t that
  • Is there a plugin not firing correctly? Well, this is native Microsoft standard functionality within the platform, so unlikely, but we double-checked to make sure. No, there wasn’t anything causing issues in that dimension
  • Does it work for users, when it’s created manually within the system? Yes, it DOES work when users enter an order/order line with a product. Hmm…this was getting VERY confusing

For clarification, we didn’t want to auto-calculate the information within ADF, and then push it into the relevant Dynamics 365 columns. We wanted to be able to rely on the system working in the way that it should!

Finally, we found out why the calculated columns weren’t working. There’s actually a system setting that governs how this works:

With this set, the auto calculations are now working in the system:

So, thankfully we managed to get this working, and everything went smoothly from that point.

Have you ever been caught out by something similar? I’d love to hear – please drop a comment below!

Michelle Wong on The Oops Factor

Chatting to Michelle about her long-time interest in anime/manga, the wonders of #PowerAutomate cloud flows, & what might happen as a result of an unexpected loop…


If you’d like to come appear on the show, please sign up at http://bit.ly/2NqP5PV – I’d love to have you on it!

Click here to take a look at the other videos that are available to watch.

Antti Pajunen on The Oops Factor

Speaking to Antti around whiskey collecting (something that a lot of the #community seems to enjoy?), and the importance of PROPER requirements gathering during projects (especially around ‘low code’!)


If you’d like to come appear on the show, please sign up at http://bit.ly/2NqP5PV – I’d love to have you on it!

Click here to take a look at the other videos that are available to watch.